EPSON Stylus C63/64/83/84 Revision A
Adjustment Overview 38
Figure 2-4. Bi-D Adjustment Pattern3
2.1.4 PF Adjustment
1)Set Super Fine Photo Paper A4 on the Paper Support.
2)Select PF adjustment in the adjustment program.
3)Print the PF adjustment check patterns, choose the pattern that has the smallest
displacements, and enter it in the adjustment program.
4)Print the check patterns again, and check the adjustment result.
Figure 2-5. PF Adjustment Pattern 1
Figure 2-6. PF Adjustment Pattern 2
2.1.5 PW Adjustment
1)Set Economy Photo Paper A4 on the Paper Support.
2)Print the PW sensor adjustment check pattern, choose the pattern number
5
mm
away from each edge, and enter it in the adjustment program.
Figure 2-7. PW Adjustment Pattern
1) There need to be no White Banding.
2) There need to be no Black Banding.
OK pattern
[Reference]
GAP for banding pat
-
tern of PF adjustment
is
±
35mm.
Sample for White Banding Sample for Black Banding
NG pattern
To Next Page
Loading...
