86 Control Panel
cFront/Rear button
Selects the front or rear tractor. If you have been using
paper loaded on one tractor, first remove the printed
output before pressing this button to switch the tractor.
dFont (ItemU) button
❏ Selects one of the fonts. To select a font, see “Selecting
a Font and Pitch” on page 89.
❏ When the printer enters the SelecType mode and
default-setting mode, the button works as an ItemU
button. You can press the ItemU button to select the
previous menu. See “Changing the printer’s settings”
on page 101 for details.
e Reset
When you press both the Font and Pitch buttons
simultaneously, the printer clears buffer and returns to its
default settings.
fPitch (ItemD) button
❏ Selects one of the pitch settings. To select a pitch, see
“Selecting a Font and Pitch” on page 89.
❏ When the printer enters the SelecType mode and
default-setting mode, the button works as an ItemD
button. You can press the ItemD button to select the
next menu. See “Changing the printer’s settings” on
page 101 for details.
To Next Page
Loading...
