8
Setting Up the Printer
Installing the Ribbon Cartridge
EPSON recommends the use of genuine EPSON ribbon cartridges
(S015139/S015066 for black, S015067 for color). Products not
manufactured by EPSON may cause damage to your printer,
which is not covered by EPSON’s warranties.
Follow these steps to install the ribbon cartridge:
w
Warning:
You need to move the print head by hand to install the ribbon
cartridge. If you have just used the printer, the print head may be
hot; let it cool for a few minutes before touching it.
1. Make sure the power cord is not plugged into an electrical
outlet.
2. Open the printer cover by holding the finger grips on both
ends of the cover and lifting it up.
To Next Page
Loading...
