2 DM-D500 Installation Guide
English
Unpacking
The items shown in illustration 1 are in the box.
Make sure that you have all the items shown, and that none has
been damaged. If you find anything missing or damaged, contact
your DM-D500 dealer.
Cautions on Handling
When you use the DM-D500, note the following points:
❏ Avoid locations that are subject to high temperature and
humidity.
❏ Avoid dirty and dusty locations.
❏ Avoid locations that are unstable or are subject to high levels of
vibration.
❏ When connecting or disconnecting cables, make sure that the
power switch of the DM-D500 and printers connected to the
DM-D500 are turned off.
❏ Do not drop the DM-D500, because you may damage the built-
in vacuum fluorescent display.
Usage
The DM-D500 can be used with the following equipment.
❏ TM-H5000II and TM-J8000 printers. You can attach the
DM-D500 to TM-H5000II and TM-J8000 printers using the
“DM-D pole unit for TM printers (Type
B)” (DP-503). (See
page
5.)
User’s Manual
display (DM-D500)
1
To Next Page
Loading...
Need help?
General
