37
Maintenance
Appendix
Consumable Replacement Periods
Air Filter Replacement Period
If the air filter becomes broken or too dirty to clean
Replace with an optional air filter.
"Appendix: Optional Accessories" p.41
Lamp Replacement Period
•
The message "Replace the lamp." appears on the screen when projection starts.
•
The projected images get darker or start to deteriorate.
•
The replacement warning message is set to appear after a minimum of about 1600
hours of lamp use in order to maintain the initial brightness and quality of the
projected images. The time taken for the message to appear will vary depending on
usage conditions such as Color Mode settings.
If you continue to use the lamp after this period, the possibility of the lamp breaking
becomes greater. When the lamp replacement message appears, replace the lamp
with a new one as soon as possible, even if it is still working.
•
The actual life of each individual lamp will vary depending on the characteristics of the
lamp and on the way it has been used. The lamp may start to become dark or stop
turning on even before the lamp replacement message appears. You should always
have a spare lamp ready in case it is needed.
•
Contact your dealer for a spare lamp.
A message will be displayed.
To Next Page
Loading...
Need help?
General