5.
Specify scanning settings on the Scan tab.
❏ Source: Select the source where the original is placed. When scanning 2-sided originals, select Double-
Sided.
❏ Document Size: Select the size of the original you placed.
❏ Image Type: Select the color type for saving the scanned image.
❏ Rotation: Select the rotation angle according to the original you want to scan.
❏ Resolution: Set the resolution.
Note:
You can also adjust the image using following items.
❏ Text Enhancement: You can make blurred letters in the original clear and sharp.
❏ Correct Document Skew: Select to correct the slant of the original.
❏ Skip Blank Page: Select to skip blank pages if any in the originals.
Scanning
>
Required Settings for Scanning
>
Creating a Job in Document Capture (Mac OS)
70
To Next Page
Loading...
Need help?
General
