6.
Adjust the edge guides, and then place the original in the ADF.
Scanning starts automatically.
7.
Aer scanning ends, place the next original in the ADF.
Repeat this procedure until you have scanned all originals.
Note:
If you want to scan originals that are detected as double feeds, such as plastic cards and envelopes, enable DFDS
Function to skip double feed detection.
To scan originals that are likely to jam, such as thin paper, enable Slow to slow down the feeding speed.
8.
Aer you have scanned all originals, exit Automatic Feeding Mode.
Select the Save and Finish on the scanner control panel, or click Finish on the Automatic Feeding Mode
window displayed on your computer.
e scanned image is saved to the folder you specied.
Related Information
& “Placing Originals” on page 32
Scanning
>
Scanning with Manual Feed in Automatic Feeding Mode
84
To Next Page
Loading...
