Epson DS-410 - Ripple Patterns Appear in an Image; Spots or Lines Appear in All Scanned Images

109
• If you are using OCR software, check the manual for any additional adjustments.
Parent topic: Solving Scanned Image Quality Problems
Related concepts
Convert Scanned Documents to Editable Text (OCR)
Related references
Image Format Options
Related tasks
Scanning in Epson Scan 2
Ripple Patterns Appear in an Image
You may see a ripple pattern (called a moiré) in scanned images of printed documents. This is caused
by interference from differing pitches in the scanner's screen and your original's halftone screen. To
reduce this effect, adjust these Epson Scan 2 settings (if available) and try scanning again:
• Select the Descreening setting.
• Select a lower Resolution setting.
Parent topic: Solving Scanned Image Quality Problems
Related references
Image Format Options
Related tasks
Scanning in Epson Scan 2
Cleaning Inside Your Scanner
Spots or Lines Appear in All Scanned Images
If spots or lines appear in all your scanned images, follow these steps to clean the scanner glass:
1. Turn off the scanner and unplug the AC adapter.
2. Disconnect any connected cables.