51
8. Select any destination settings as necessary and click OK.
Note: See the help information in Document Capture Pro for details.
9. Confirm your settings and click OK.
Parent topic: Scanning
Related tasks
Scanning in Epson Scan 2
Loading Originals in the Input Tray
Loading Plastic Cards in the Input Tray
Loading Special Originals
Scanning with Document Capture Pro in Standard View - Windows
You can use Document Capture Pro in Standard View to select settings, preview, and change the
scanned file settings as necessary.
Note: The settings may vary, depending on the software version you are using. See the help information
in Document Capture Pro for details.
1. Load your original in the product.
2. Do one of the following to start Document Capture Pro:
• Windows 10: Click and select Epson Software > Document Capture Pro.
• Windows 8.x: Navigate to the Apps screen and select Document Capture Pro.
• Windows (other versions): Click or Start, and select All Programs or Programs. Select
Epson Software > Document Capture Pro.
You see the Document Capture Pro window. (You may see a screen asking you to select your
scanner first; if you do, select your product.)
3. If you see a Switch to Standard View button in the upper right corner of the window, click it.
To Next Page
Loading...
