127
5. Gently pull out any jammed originals from the output tray.
6. Close the scanner cover.
7. Carefully follow all loading instructions when you reload originals.
If originals jam in the scanner frequently, try the following:
• Select Slow on the scanner control panel to slow down the scanning speed.
• Clean inside the scanner and replace the roller assembly kit, if necessary.
• Close the output tray and let the originals fall freely onto the surface below the scanner.
Parent topic: Solving Scanning Problems
Related tasks
Cleaning Inside Your Scanner
Related topics
Loading Originals
Scanning is Slow
If scanning becomes slow, try these solutions:
• Scan your original at a lower resolution, if possible.
To Next Page
Loading...
