57
6. Select a job.
You see a screen like this:
7. If you want to change the scan settings, select Settings.
8. Select from the following options:
• To change the job settings, select Edit. Change the scan settings as necessary.
Note: Make sure the Disable job setting changes on the control panelsetting is not selected in
Document Capture Pro or Document Capture.
• To skip double feed detection when scanning originals such as envelopes or plastic cards, set the
DFDS Function setting to On.
• To slow down the scanning speed, set the Slow setting to On.
9. Select the Start icon.
Setting the Operation Mode on the Product Control Panel
Adding and Assigning Scan Jobs with Document Capture Pro - Windows
Adding and Assigning Scan Jobs with Document Capture - Mac
Scanning Using Web Services for Devices (WSD) - Windows
Parent topic: Starting a Scan
To Next Page
Loading...
