Using Multiple Projectors
155
a
Press the [Menu] button, select the Multi-Projection menu, and press
[Enter].
b
Select Color Matching and press [Enter].
c
Set the Adjustment Level to 8.
d
Select Brightness and adjust the value.
e
Select Red, Green, or Blue and adjust the color tone, if necessary.
f
Go back to the top level menu and select the Operation menu and
press [Enter].
g
Select Light Source Brightness Control and press [Enter].
h
Set the Light Source Mode to Custom.
i
Adjust the Brightness Level.
j
Repeat steps 1 through 5 multiple times, each time selecting to adjust
levels 7 through 2 in the same way.
k
When you are finished, press [Menu].
To Next Page
Loading...
