Air Filter and Vent Maintenance
255
Regular filter maintenance is important to maintaining your projector. Clean
the air filter when a message appears telling you the temperature inside the
projector has reached a high level. It is recommended that you clean these
parts over a 12,000 hour period. Clean them more often than this if you use
the projector in a environment that is dustier than expected. (Assuming the
projector is used in an atmosphere in which airborne particulate matter is less
than 0.04 to 0.2 mg/m3.)
Attention
If regular maintenance is not performed, your Epson projector will notify you
when the temperature inside the projector has reached a high level. Do not wait
until this warning appears to maintain your projector filter as prolonged exposure
to high temperatures may reduce the life of your projector.
gg Related Links
• "Cleaning the Air Filter" p.255
• "Replacing the Air Filter" p.256
Cleaning the Air Filter
You need to clean the projector's air filters in the following situations:
• The filter or vents get dusty.
• You see a message telling you to clean it.
a
Turn off the projector and unplug the power cord.
b
Slide the air filter cover latch and open the air filter cover.
c
Open the stopper.
To Next Page
Loading...
