Wireless Network Projection from a Mobile Device (Screen Mirroring)
183
a
Press the [Menu] button, select the Management menu, and press
[Enter].
b
Set the Wireless LAN Power setting to On.
c
Select the Network menu and press [Enter].
d
Select Network Settings and press [Enter].
e
Select Priority Control Interface and press [Enter].
f
Choose one of the following options:
• If you cast the data via local area network using the wired LAN,
select Wired LAN.
• If you cast the data directly or via wireless access point, select
Wireless LAN.
• If your device only supports casting data directly, select Wireless
LAN.
To Next Page
Loading...
