Epson EB-810E - Table of Contents

Contents
2
About This Installation Guide
Contents of this Guide ................. 1
Tightening Torques for Screws..............1
Introduction
Using the Product Safely ............... 3
Safety Indications.......................3
Explanation of Symbols ................... 3
Package Contents . . ................... 4
Setting Plate ........................... 4
Main Mount ......................... 4
Accessories .......................... 5
Necessary Items ......................... 6
Figures of Installation Dimensions ...... 7
Connection Figure .................... 9
Connecting Multiple Projectors .............. 9
Installing the Setting Plate
Notes on Installing the Setting Plate
...................................... 10
Cautions on the Installation Location of
the Setting Plate ..................... 14
Setting Plate Specifications ........... 16
External Dimensions ..................... 17
Adjustment Range ...................... 19
Vertical slide ........................19
Horizontal slide ...................... 20
Forward/backward slide ................20
Mini PC Installation Plate.................21
Installing the Setting Plate ........... 22
Attaching the Mount ....................23
Determining the installation position
(projection distance tables) .............. 23
Attaching the adjustment unit to the
projector ........................... 35
Install the wall plate on the wall..........36
Install the arm unit on the wall plate . . . . . . . 38
Attach the adjustment unit to the arm unit
.................................. 43
Attaching peripheral devices............44
Adjusting the Position of the Projected Image
....................................46
Preparations before adjusting ............ 48
Performing mechanical adjustment using
the Setting Plate Installation Guide........48
Adjusting using the projector menus . . . . . . . 52
Attaching the Covers .................... 57
Attaching a Security Cable ................59
Attaching the Safety Wire ................. 60
Setting the Projector
Batch Setup Function ................ 62
Setup Using a USB flash drive ..............62
Saving settings to the USB flash drive......62
Copying saved settings to other projectors
.................................. 63
Setup by Connecting the Computer and
Projector with a USB Cable ................ 64
Saving settings to a computer ............ 64
Copying saved settings to other projectors
.................................. 65
When Setup Fails ....................... 66
Installing Multiple Projectors Side-by-
Side ................................ 67
Setting the Projector ID .................. 67
HDMI Link Settings ...................... 69
Appendix
List of Safety Symbols ................ 71
General Notice ...................... 74