Epson EB-G6900WU - Displaying a Test Pattern

Example: When the Screen Type is set to 4:3 for EB-G6900WU
You can move the image to the left and right.
a
Press the [Menu] button while projecting.
s "Using the Configuration Menu" p.84
b
Select Display from Extended.
c
Select Screen Position from Screen.
d
Use the [ ], [ ], [ ], and [ ] buttons to adjust the position of
the image.
You can check the current display position by using the background
test pattern.
e
Press the [Menu] button to finish making settings.
a
The Screen Position cannot be adjusted in the following situations.
• If the Screen Type is set to 16:10 when using EB-G6900WU
• If the Screen Type is set to 4:3 when using EB-G6800
Displaying a Test Pattern
A test pattern can be displayed to adjust the projection status without
connecting video equipment.
The shape of a test pattern is according to the setting of Screen Type. Set
Screen Type first.
s "Screen Settings" p.22
a
Press the [Test Pattern] button on the remote control or the [ ]
button on the control panel while projecting.
Installing the Projector
23