Epson EB-G6900WU - Corner Wall

Corner Wall
a
• Project onto a surface with a right angle.
• If a large amount of adjustment is performed, the focus may not be
uniform even after making adjustments.
• You may not be able to adjust Corner Wall correctly when using the
short throw zoom lens ELPLU01.
a
Press the [Menu] button while projecting.
b
Select Geometric Correction from Settings.
c
Select Corner Wall, and then press the [ ] button.
If the message "If this setting is changed, the image may be
distorted." is displayed, press the [
] button.
d
Select Corner Type, and then press the [ ] button.
e
To fit the projected image to the projection position, select
Horizontal Corner or Vertical Corner, and then press the [
]
button.
When the surfaces line up horizontally
Select Horizontal Corner.
When the surfaces line up vertically
Select Vertical Corner.
From here on, steps are explained using Horizontal Corner as an
example.
f
Press the [Esc] button to return to the screen in step 4. Select
Correct Shape, and then press the [
] button.
g
Adjust the position of the projector and the lens shift so that the
line in the center of the screen matches the corner (the point
where the two surfaces meet).
s
"Adjusting the Position of the Projected Image (Lens Shift)"
p.24
Adjusting Projected Images
47