Submenu Function
Reset
You can reset all adjustment values for the Extended menu
to their default settings. However, the following items are
not reset.
Screen Type, Screen Position, Projection, Direction, High
Altitude Mode, Remote Control Type, Inv Direction
Button, Startup Source Search, A/V Mute Release, Lens
Type, A/V Output, Monitor Out, Standby Mode, Control
Communications, Multi-screen, Projector ID, and
Language
See the following to return all menu items to their default
settings.
s
"Reset Menu" p.101
* When User's Logo Protection is set to On in Password Protection, settings
related to user's logo cannot be changed. You can make changes after setting
User's Logo Protection to Off.
s "Managing Users (Password Protection)" p.78
Network Menu
When Network Protection is set to On in Password Protection, a message
is displayed and the network settings cannot be changed. Set Network
Protection to Off and then configure the network.
s "Setting Password Protection" p.78
Submenu Function
Net. Info. - Wired
LAN
Displays the following network setting status information.
• Projector Name
• DHCP
• IP Address
• Subnet Mask
• Gateway Address
• MAC Address
Network Config-
uration
The following menus are available for setting Network items.
Basic, Wired LAN, Mail, Others, and Reset
Notes on operating the Network menu
Selecting from the top menu and sub menus, and changing selected items is
the same as making operations from the Configuration menu.
When done, make sure you go to the Setup complete menu, and select Yes,
No, or Cancel. When you select Yes or No, you are returned to the
Configuration menu.
List of Functions
95
To Next Page
Loading...
