EasyManuals Logo

Epson EB-PU1006W User Manual

Epson EB-PU1006W
329 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
31
Setting Up the Projector
Follow the instructions in these sections to set up your projector for use.
Projector Placement
Projector Connections
Attaching and Removing a Lens
Attaching and Removing the Cable Cover
Installing Batteries in the Remote Control
Projector Placement
You can place the projector on almost any flat surface to project an image.
You can also install the projector in a ceiling mount if you want to use it in a fixed location.
Keep these considerations in mind as you select a projector location:
Place the projector on a sturdy, level surface or install it using a compatible mount.
Leave plenty of space around and under the projector for ventilation, and do not place it on top of or
next to anything that could block the vents.
Position the projector within reach of a grounded electrical outlet or extension cord.
Projector Setup and Installation Options
Projection Distance
Parent topic: Setting Up the Projector
Projector Setup and Installation Options
You can set up or install your projector in the following ways:
Front

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-PU1006W and is the answer not in the manual?

Epson EB-PU1006W Specifications

General IconGeneral
Matrix size0.76 \
Heat dissipation1247.8 BTU/h
Number of colors1.07 billion colors
Native aspect ratio16:10
Projection technology3LCD
Contrast ratio (typical)2000:1
Screen size compatibility- \
Projector native resolutionWUXGA (1920x1200)
Keystone correction, vertical-45 - 45 °
Keystone correction, horizontal-30 - 30 °
Projector brightness (economic mode)4200 ANSI lumens
Light source typeLaser
Service life of light source20000 h
Service life of light source (economic mode)30000 h
Throw ratio0.35 - 10.11:1
Focal length rangevaries by lens mm
Interchangeable lensYes
3DNo
Video processing10 bit
Video color modesCinema, Dynamic, Natural, Presentation, DICOM simulation mode, Multi-projection, BT.709
Analog signal format systemNot supported
Serial interface typeRS-232C
USB 2.0 ports quantity2
Noise level30 dB
Country of originPhilippines
Noise level (economic mode)28 dB
PlacementCeiling, Desktop, Flying frame
Product typeLarge venue projector
Product colorWhite
Market positioningPresentation
Cable lock slot typeKensington
Power sourceAC
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.5 W
Power consumption (typical)367 W
Power consumption (economy mode)310 W
Storage temperature (T-T)-10 - 60 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
Bundled softwareInhalt DIY-App, EasyMP Multi PC Projection, Epson Projektor Content Manager, Epson Projektor Management, Epson Projektor Professional Tool
Supported network protocolsHTTPS, IPv6, SNMP, ESC/VP.net, PJLink
Software supportvia: Crestron Integrated Partner, Extron IP Link, Extron XTP, AMX Device Discovery
Pallet weight0 g
Quantity per pack1 pc(s)
Quantity per pallet14 pc(s)
Harmonized System (HS) code85286200
Weight and Dimensions IconWeight and Dimensions
Depth436 mm
Width545 mm
Height189 mm
Weight15400 g
Package depth760 mm
Package width561 mm
Package height265 mm
Package weight20604 g

Related product manuals