318
Laser Hazard Distance
When using projectors and interchangeable lenses that change to Risk Group 3, no direct exposure to
the beam is permitted. Operators must control access to the beam within the hazard distance or install
the product at a height that will prevent eye exposure within the hazard distance. Refer to the table here
for the Exposure Hazard Values (EHV) in accordance with the IEC62471-5 standard. Looking into the
lens at distances closer than those indicated here can cause damage to eyesight.
EB-PU1006W/EB-PU1007B/EB-PU1007W/EB-PU1008B/EB-PU1008W
Exposure Hazard Value (EHV)
Lens Wide Tele
ELPLX01 3.1 inches (0.08 m) —
ELPLX02 — —
ELPLU04 9.1 inches (0.23 m) 10.2 inches (0.26 m)
ELPLU06 6.3 inches (0.16 m) 6.7 inches (0.17 m)
ELPLW05 9.8 inches (0.25 m) 11.4 inches (0.29 m)
ELPLW06 18.5 inches (0.47 m) 22.0 inches (0.56 m)
ELPLW08 11.4 inches (0.29 m) 13.8 inches (0.35 m)
ELPLM08 17.7 inches (0.45 m) 23.2 inches (0.59 m)
ELPLM10 48.0 inches (1.22 m) 65.0 inches (1.65 m)
ELPLM11 72.4 inches (1.84 m) 97.6 inches (2.48 m)
ELPLM15 27.6 inches (0.70 m) 41.3 inches (1.05 m)
ELPLL08 103.5 inches (2.63 m) 122.8 inches (3.12 m)
EB-PU2010B/EB-PU2010W
Exposure Hazard Value
Lens Wide Tele
ELPLX01 — —
ELPLX02 2.4 inches (0.06 m) —
ELPLU04 5.5 inches (0.14 m) 6.3 inches (0.16 m)
To Next Page
Loading...
