62
Projecting a PC Free Presentation
You return to the file list screen.
• To display a slide show of all the images in a folder, press the arrow
f
Turn off the USB device, if necessary, and then disconnect the device
buttons to highlight the Slideshow option at the bottom of the screen from the projector.
and press [Enter].
gg Related Links
• You can change the image switching time by highlighting
• "PC Free Display Options" p.63
Option at the bottom of the screen and pressing [Enter].
a
• "Connecting to a USB Device" p.27
• If any file names are longer than the display area or include
unsupported symbols, the file names may be shortened or
changed only on the screen display.
Starting a PC Free Movie Presentation
After connecting a USB device to the projector, you can switch to the USB
d
While projecting, use the following commands to control the display:
input source and start your movie.
• To rotate a displayed image, press the up or down arrow button.
You can change the PC Free operation options by highlighting Option
at the bottom of the screen and pressing [Enter].
a
a
Press the [USB] button on the remote control.
The PC Free file list screen is displayed.
• To move to the next or previous image, press the left or right arrow
button.
e
To stop the display, follow the on-screen instructions or press the [Esc]
button.
To Next Page
Loading...
Need help?
General
