Automatically Detect Input Signals and Change
the Projected Image (Source Search)
Press the [Source Search] button to project images from the port currently
receiving an image.
Using the remote control Using the control panel
* (EB-X14/EB-W12/EB-X12 only)
When two or more image sources are connected, press the [Source Search]
button until the target image is projected.
When your video equipment is connected, start playback before beginning
this operation.
a
The following screen is displayed while no image signals are input.
Example: EB-X14/EB-W12/EB-X12
Projecting Images
31
To Next Page
Loading...
Need help?
General
