Adjusting the Horizontal Tilt
Extend and retract the rear feet to adjust the projector's horizontal tilt.
A
Extend the rear foot.
B
Retract the rear foot.
Correcting the Focus
You can correct the focus using the focus ring.
EB-X14/EB-W12/EB-X12/EB-X11
EB-S12/EB-S11
Adjusting the Volume
You can adjust the volume using one of the following methods.
• Press the [Volume] button on the control panel or the remote control
to adjust the volume.
[
a] Decreases the volume.
[
b] Increases the volume.
Using the remote control Using the control panel
(EB-X14/EB-W12/EB-X12/EB-X11 only)
• Adjust the volume from the Configuration menu.
s Settings - Volume p.70
Caution
Do not start at high volume.
A sudden excessive volume may cause loss of hearing. Always lower the volume
before powering off, so that you can power on and then gradually increase the
volume.
Selecting the Projection Quality (Selecting Color
Mode)
You can easily obtain the optimum image quality simply by selecting the
setting that best corresponds to your surroundings when projecting. The
brightness of the image varies depending on the mode selected.
Adjusting Projected Images
41
To Next Page
Loading...
Need help?
General
