Name Function
C
Front adjustable foot
When setup on a surface such as a desk, extend the foot to
adjust the position of the image.
s "Adjusting the Image Position" p.36
D
Security cable
installation point
Pass a commercially available wire lock through here and
lock it in place.
s "Installing the wire lock" p.51
Control Panel
All of the features in this guide are explained using illustrations of EB-
X14H unless otherwise mentioned.
Name Function
A
[t] button
Turns the projector power on or off.
s "From Installation to Projection" p.26
B
[Source Search]
button
Changes to the next input source that is sending an image.
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.27
C
[Enter] button
[
]
• When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
• If pressed while projecting analog RGB signals from the
Computer1 or Computer2 port, you can automatically
optimize Tracking, Sync., and Position.
Part Names and Functions
12
To Next Page
Loading...
Need help?
General
