c
Select On.
The setting is stored for each Color Mode.
d
Press the [Menu] button to finish making settings.
a
Auto Iris can only be set when the Color Mode is Dynamic or
Theatre.
Changing the Aspect Ratio of the Projected
Image
You can change the Aspect Ratio
g
of the projected image to suit the type,
the ratio of height and width, and the resolution of the input signals.
Available aspect modes vary depending on the image signal currently being
projected.
Changing methods
Each time you press the [Aspect] button on the remote control, the aspect
mode name is displayed on the screen and the aspect ratio changes.
Remote control
a
You can set the aspect ratio from the Configuration menu.
s Signal - Aspect p.58
Changing the aspect mode
Projecting images from video equipment
Each time the [Aspect] button is pressed, the aspect mode changes in the
order 4:3 and 16:9.
Example: 720p signal input (resolution: 1280x720, aspect ratio: 16:9)
A
4:3
Adjusting Projected Images
39
To Next Page
Loading...
Need help?
General
