H/V-Keystone
Manually correct distortion in the horizontal and vertical directions
independently.
a
Press the [w] or [v] button on the control panel during
projection to display the Keystone screen.
b
Press the following buttons to correct keystone distortion.
Press the [
w] or [v] button to correct vertical distortion.
Press the [a]/[b] buttons or the [Wide]/[Tele] buttons to correct
horizontal distortion.
a
You can also set H/V-Keystone from the Configuration menu.
s Settings - Keystone - H/V-Keystone p.77
Quick Corner
This allows you to manually correct each of the four corners of the
projected image separately.
a
Press the [Menu] button while projecting.
s "Using the Configuration Menu" p.72
Using the remote control Using the control panel
Adjusting Projected Images
38
To Next Page
Loading...
Need help?
General
