❏ Network status sheet
❏ Product status screen for Web
Cong
Launch a web browser from the connected device, and then enter the IP address for Wi-Fi Direct (Simple AP) to
open Web Cong. Tap Product Status > Wi - Fi D i r e c t and check the Wi-Fi Direct status.
Disconnect unnecessary devices
If the maximum number of devices have already been connected to the printer, disconnect the unnecessary devices
and try to connect the new device.
Delete the SSID for Wi-Fi Direct on the Wi-Fi screen for the device that you do not need to connect to the printer.
User's Guide
Solving Problems
102
To Next Page
Loading...
