Solving Problems
Checking the Printer Status
Lights and Printer Status
Lights on the control panel indicate the status of the printer.
Normal Status
: On
Light Status
The printer is connected to a wireless (Wi-Fi) network.
The printer is connected to a network in Wi-Fi Direct (Simple AP) mode.
Error Status
When an error occurs, the light turns on or ashes. Details of the error are displayed on the computer screen.
/ : On
/ : Flashing
Light Status Solutions
Wi-Fi connection error has occurred. Press the button to clear the error and try again.
Initial ink charging may not be complete. See the Start Here poster to complete initial ink
charging.
Ink relling may not be complete.
Rell the ink inside the ink tank, and then press the
H
button to return the tank to the home position.
Ink tank cap is not fully closed.
Push in the cap rmly, and then press the
H
button.
No paper is loaded or more than one sheet
has been fed at a time.
Load paper and press the
button.
User's Guide
Solving Problems
89
To Next Page
Loading...
