Epson EcoTank ET-M1120 - Control Panel

A
Rear cover Remove when removing jammed paper.
B
USB port Connects a USB cable to connect with a computer.
C
AC inlet Connects the power cord.
Control Panel
Buttons and Functions
A
Turns the printer on or o.
Unplug the power cord after checking that the power light is o.
B
When a network error occurs, pressing this button cancels the error. Hold this button down for more than ve
seconds to perform Wi-Fi auto setup using the WPS push button.
C
Prints a network connection report allowing you to determine the causes of any problems you may have using the
printer on a network. If you need more detailed network settings and connection status, hold this button down for
at least
ve
seconds to print a network status sheet.
D
When a error occurs, pressing this button cancels the error.
Hold this button down for at least ve seconds to move the ink tank to the ink relling position, or to return it to
the home position.
E
Stops the current operation. Cancels paper out errors and paper jam errors.
Hold this button down for ve seconds until the
P button ashes to run print head cleaning.
User's Guide
Printer Basics
12