Epson EcoTank ET-M1120 - Paper Feeds at a Slant; Several Sheets of Paper Are Fed at a Time; Power and Control Panel Problems; Power Does Not Turn on

Related Information
& “Removing Jammed Paper” on page 91
& “Loading Paper in the Paper Cassette” on page 33
Paper Feeds at a Slant
Load paper in the correct direction, and slide the edge guides against the edges of the paper.
Related Information
& “Loading Paper in the Paper Cassette” on page 33
Several Sheets of Paper are Fed at a Time
❏ When several sheets of paper are fed at a time during manual 2-sided printing, remove any paper which is
loaded in the printer before you reload the paper.
❏ If the paper is pushed in, align the paper to the paper size line on the paper cassette.
Power and Control Panel Problems
Power Does Not Turn On
❏ Make sure the power cord is securely plugged in.
❏ Hold down the
P button for a little longer.
Power Does Not Turn O
Hold down the P button for a little longer. If you still cannot turn o the printer, unplug the power cord. To
prevent the print head from drying out, turn the printer back on and turn it o by pressing the
P button.
Power Turns O Automatically
❏ Wi n d o w s
Click Printer and Option Information on the printer driver's Maintenance tab.
❏ Disable the Power O If Inactive and Power O If Disconnected settings.
❏ Disable the Power O Timer setting.
User's Guide
Solving Problems
95