EasyManua.ls Logo

Epson EcoTank ET-M1120 - Page 106

Epson EcoTank ET-M1120
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Rell the ink tank if the ink level is below the lower line.
Perform a nozzle check, and then clean the print head if any of the print head nozzles are clogged.
Align the print head.
Checking the paper
Use paper supported by this printer.
Do not print on paper that is damp, damaged, or too old.
If the paper is curled or the envelope is
pued
up,
atten
it.
Do not stack the paper immediately aer printing.
Dry the printouts completely before ling or displaying them. When drying the printouts, avoid direct sun light,
do not use a dryer, and do not touch the printed side of paper.
When printing images or photos, Epson recommends using genuine Epson paper rather than plain paper. Print
on the printable side of the genuine Epson paper.
Checking the print settings
Select the appropriate paper type setting for the type of paper loaded in the printer.
Print using a higher quality setting.
During bidirectional (or high speed) printing, the print head prints while moving in both directions, and
vertical lines may be misaligned. If print quality does not improve, disable the bidirectional (or high speed)
setting. Disabling this setting may slow down printing speed.
Wi n d o w s
Clear High Speed on the printer drivers More Options tab.
Mac OS
Select System Preferences from the
menu > Printers & Scanners (or Print & Scan, Print & Fax), and
then select the printer. Click Options & Supplies > Options (or Driver). Select
O
as the High Speed
Printing setting.
Checking the ink bottle
Use ink bottles with the correct part code for this printer.
Epson recommends using the ink bottle before the date printed on the package.
Try to use genuine Epson ink bottles.
is
product is designed to adjust colors based on the use of genuine
Epson ink bottles. e use of non-genuine ink bottles may cause print quality to decline.
Related Information
&
Check if Nozzles are Clogged (Nozzle Check)” on page 72
&
“Aligning the Print Head” on page 77
& “Available Paper and Capacities” on page 31
& “List of Paper Type” on page 36
& “Paper Handling Precautions” on page 32
User's Guide
Solving Problems
106

Table of Contents

Related product manuals