Epson EcoTank ET-M1180 Series - Paper Feeds at a Slant; Ejected Paper Falls from the Output Tray; Paper is Ejected During Printing; Power and Control Panel Problems

Related Information
& “Removing Jammed Paper” on page 96
& “Loading Paper in the Paper Cassette” on page 33
Paper Feeds at a Slant
Load paper in the correct direction, and slide the edge guides against the edges of the paper.
Related Information
& “Loading Paper in the Paper Cassette” on page 33
Ejected Paper Falls from the Output Tray
Open the feeder guard to stop ejected paper falling from the output tray.
Paper is Ejected During Printing
When you load letterhead paper (paper on which information such as the sender's name or corporation name are
pre-printed in the header), select Letterhead as the paper type setting.
Power and Control Panel Problems
Power Does Not Turn On
❏ Make sure the power cord is securely plugged in.
❏ Hold down the
P button for a little longer.
Power Does Not Turn O
Hold down the P button for a little longer. If you still cannot turn o the printer, unplug the power cord. To
prevent the print head from drying out, turn the printer back on and turn it
o
by pressing the
P button.
Power Turns O Automatically
❏ Wi n d o w s
Click Printer and Option Information on the printer driver's Maintenance tab.
❏ Disable the Power O If Inactive and Power O If Disconnected settings.
❏ Disable the Power O Timer setting.
User's Guide
Solving Problems
101