Epson EcoTank ET-M1180 Series - Checking the Network Connection Status

Checking the Network Connection Status
You can check the network connection status in the following way.
Checking the Network Status Using Network Light
You can check the network connection status using the network light on the printer’s control panel.
Printing a Network Status Sheet
You can check the detailed network information by printing it such as the maximum number of devices you can
connect by Wi-Fi Direct (simple AP).
1. Load papers.
2. Hold down the
button on the printer's control panel for at least ve seconds until the power light ashes.
e network status sheet is printed.
Note:
If you release the
button within
ve
seconds before the power light
ashes,
a network connection report is printed.
Related Information
& “Messages and Solutions on the Network Connection Report” on page 23
User's Guide
Network Settings
22