Removing Jammed Paper from the Front Cover
!
Caution:
Never touch the buttons on the control panel while your hand is inside the printer. If the printer starts operating, it
could cause an injury. Be careful not to touch the protruding parts to avoid injury.
1. Open the front cover.
2.
Lower the output switch lever.
3. Remove the jammed paper.
c
Important:
Do not touch the parts inside the printer. Doing so may cause a malfunction.
4.
Raise the output switch lever.
5. Close the front cover.
User's Guide
Solving Problems
97
To Next Page
Loading...
