Control Panel
Buttons and Functions
A
Turns the printer on or o.
Unplug the power cord after checking that the power light is o.
B
Prints a network connection report allowing you to determine the causes of any problems you may have using the
printer on a network. If you need more detailed network settings and connection status, hold this button down for
at least ve seconds to print a network status sheet.
C
When a network error occurs, pressing this button cancels the error. Hold this button down for more than ve
seconds to perform Wi-Fi auto setup using the WPS push button.
D
Stops the current operation. Cancels paper out errors and paper jam errors.
Hold this button down for ve seconds until the
P
button ashes to run print head cleaning.
Functions using Button Combinations
+
Wi-Fi Direct (Simple AP) Setup
Hold down the
and buttons simultaneously to start Wi-Fi Direct (Simple AP) Setup.
+
PIN Code Setup (WPS)
Hold down the
and buttons simultaneously to start PIN Code Setup (WPS).
+
Restore Default Network Settings
Turn the printer on while holding down the
button to restore the default network
settings. When the network settings are restored, the printer turns on and the network status
lights ash alternately.
+
Prevents changes from being made to Epson Connect and Google Connect Print settings.
User's Guide
Printer Basics
13
To Next Page
Loading...
