102
• Adjust the Sharpness setting to improve image quality.
• If you are projecting from a computer, use a lower resolution or adjust the computer's resolution to
match the projector's native resolution, if possible.
• If you blurred the edges of the projected image using the Edge Blur function, press the
Flexible Picture menu button on the remote control to display the Flexible Picture menu, and then
press the blank button to disable the function.
Parent topic: Solving Image or Sound Problems
Related concepts
Projector Placement
Related references
Image Quality Settings - Picture Menu
Supported Video Display Formats
Related tasks
Cleaning the Projection Window
Focusing the Image
Solutions When the Image Brightness or Colors are Incorrect
If the projected image is too dark or light, or the colors are incorrect, try the following solutions:
• Try selecting a color mode that best fits the image and environment.
• Check your video source settings.
• Try adjusting the Scene Adaptive Gamma, Custom Settings, Color Temperature, Frame
Interpolation, Dynamic Contrast, Noise Reduction, Super-resolution, Auto Contrast
Enhancement, and Aspect Ratio settings in the Picture menu for the current input source.
• Make sure you selected the correct HDMI Video Range, HDR, or EDID settings in the Picture menu, if
available for your image source. You can make the image brighter by setting HDR to a lower number.
• When you are projecting your image onto a wall, try different wall color types for the image and
environment by selecting the Adjust color setting in the Installation menu.
• Make sure all the cables are securely connected to the projector and your video device. If you
connected long cables, try connecting shorter cables.
• Position the projector close enough to the screen.
Parent topic: Solving Image or Sound Problems
To Next Page
Loading...
