36
Note: A Google account is required to use certain features. Some apps require a paid subscription. After
initial setup, you can change the settings by selecting the Android TV settings icon at the top right of
the Android TV Home screen.
1. Turn on the projector.
2. When the pairing screen is displayed, press and hold the Enter and home remote control buttons
at the same time for about 3 seconds.
The light on the remote control flashes until pairing is complete.
3. Use the remote control directional pad and Enter button to select the language you want to use from
the language selection screen.
4. Do one of the following:
• Select Continue to use an Android phone to set up the projector's Wi-Fi and Google account
settings. Follow the on-screen instructions and skip to step 7.
• Select Skip to set up the projector's Wi-Fi and Google account settings manually. Go to the next
step.
5. Select the wireless network you want to use from the Wi-Fi setting screen and then follow the on-
screen instructions to make any necessary settings.
6. At the Google account sign-in screen, do one of the following:
• Select Sign In to sign-in to your Google account. Follow the on-screen instructions.
To Next Page
Loading...
