55
3. Select the Picture menu and press the Enter button.
4. Select Custom Settings and press the Enter button.
5. Adjust each setting in the projector's Picture menu, as necessary:
• Adjust the Brightness setting to lighten or darken the color.
• Adjust the Contrast setting to adjust the difference between light and dark areas of the image.
• Adjust the Saturation setting to adjust the overall vividness of the colors.
• Adjust the Tint setting to adjust the balance of green to magenta tones in the image.
• Adjust the Sharpness setting to adjust the outline of the image.
6. When you are finished, press the esc button to exit the menus.
Note: You can set the overall color tone by adjusting the Color Temperature setting in the Picture
menu if the image is tinted too blue or red.
Parent topic: Using Basic Projector Features
To Next Page
Loading...
