Basic Operations
27
You can make effective corrections within a projection angle of 30° left to right.
c
If you want to use the H-Keystone Adjuster, set H-Keystone Adjuster to On.
s
Settings - Keystone -
H-Keystone Adjuster p.61
Correct manually (H/V-Keystone)
You can use the buttons on the control panel to correct keystone distortion.
Press the
buttons to display the V-Keystone/H-Keystone gauges.
When the gauges are displayed, press the
buttons to perform vertical correction, and press the
buttons to perform horizontal correction.
When the top or bottom is too wide
When the left or right is too wide
c
•
You can adjust the volume by pressing the buttons when the gauges are not displayed.
s p.28
•
You can set H/V-Keystone from the configuration menu. s Settings - Keystone - H/V-Keystone - V-
Keystone/H-Keystone p.61
•
You can make effective corrections within a projection angle of 30° top to bottom and left to right.
To Next Page
Loading...
Need help?
General
