Useful Functions
49
Connecting with WirelessHD (EH-TW6100W
Only)
Installing the WirelessHD Transmitter
You can use the supplied WirelessHD Transmitter to wirelessly receive image and sound data.
Projector Transmitter Multi-media players, game consoles,
and so on
You can use the WirelessHD Transmitter in the following ways.
•
You do not need to connect a cable to the projector. This is useful if you cannot set it up near the AV device.
•
You can connect up to five AV devices at the same time, and switch images using the remote control.
•
As well as the projector, you can connect another output device, such as a television, to the Output port, and then
switch the output using the remote control.
•
This allows other output devices connected to the Output port to project images from the connected AV device, even
if the projector is off.
To Next Page
Loading...
