Basic Operations
26
If the target image is not projected
If the image is not projected, you can change the source using one of the following methods.
Remote control Control panel
Press the button for the target port. Press the [Home] button, and then select the target in-
put source on the home screen displayed.
Using the Home Screen
The Home screen feature allows you to easily select an image source and access useful functions.
Press the [Home] button on the remote control or the control panel to display the Home screen.
Under the following conditions, the Home screen is displayed automatically when the projector is turned on.
•
Home Screen Auto Disp. is set to On. s Extended - Home Screen - Home Screen Auto Disp. p.65
•
There are no signals from any sources.
a
Selects the source you want to project.
b
Displays the Connection Guide.
c
Displays the Configuration menu. s p.58
d
Performs menu options assigned to Custom Function 1 and Custom Function 2 on the Home Screen.
s Extended - Home Screen p.65
e
Sets the 3D function. s Signal - 3D Setup p.61
To Next Page
Loading...
