Introduction
10
Remote Control
Button Function
a
Power sup-
ply
(On)
Turns the projector on. s p.25
b
Standby
(Standby)
Turns the projector off. s p.27
c
[HDMI1]
[HDMI2]
[LAN]
Changes to the image from each input port.
s p.26
d
[Pattern]
Displays or closes the test pattern. s p.28
e
Playback
controls
[Link Menu]
Performs operations such as play and stop for
connected devices that meet the HDMI CEC
standards.
s p.49
f
[HDMI Link]
•
When HDMI Link is On
Displays the device connections list.
•
When HDMI Link is Off
Displays the HDMI link settings menu.
s p.49
g
[Color
Mode]
Selects the Color Mode. s p.34
h
[HDR]
Displays the adjustment screen for Dynamic
Range.
s p.61
i
Top/Bot-
tom/Left/
Right
Selects menu items and adjustment values.
s p.58
j
[Default]
The adjustment value returns to its default
value when pressed while the menu's adjust-
ment screen is displayed.
s p.58
k
[Menu]
Displays and closes the Configuration menu.
On the Configuration menu, you can make
adjustments and settings for Signal, Image,
and so on.
s p.58
l
[Fine/Fast]
Smoothly projects images with a quick frame
rate, such as games.
s p.39
m
[Keystone]
Corrects distortion in the image. s p.30
n
[User]
Performs the function assigned to the User
button.
s p.62
o
[Memory]
Saves, loads, or erases a memory. s p.44
p
[RGBCMY]
Adjusts the hue, saturation, and brightness
for each RGBCMY color.
s p.41
q
[Grayscale]
Sets the Grayscale adjustment level.
s p.59
To Next Page
Loading...
