Configuration Menu
62
Function Menu/Settings Explanation
Advanced
Video Range
*1
Auto, Limited
(16-235), Full
(0-255)
When set to Auto, the video level for the DVD
input signal to the HDMI1 or HDMI2 ports is au-
tomatically detected and set.
If you experience under or overexposure when
set to Auto, set the video level of the projector
to match that of the DVD/Blu-ray disc player's
video level. Your player may be set to Normal
(Limited) or Expand (Full).
EDID Normal, Expanded Lets you change the EDID settings.
Normal supports 3840 x 2160 30Hz signals, and
Expanded supports 3840 x 2160 60 Hz signals.
Image Processing Fine, Fast Improves the response speed for images projec-
ted at high-speed, such as games.
Reset
Yes, No
Resets all Signal settings except for Diagonal
Screen Size, 3D Viewing Notice, and Aspect.
*1
Settings are saved for each type of input source or signal.
*2
You may not be able to make selections depending on the source or type of signal.
*3
EH-TW7100 only.
Settings menu
Function Menu/Settings Explanation
Keystone
H/V-Keystone
V-Keystone -60 to 60
Corrects keystone distortion. s p.30
•
H/V-Keystone: Manually corrects horizontal and
vertical distortions.
s p.31
•
Quick Corner: Corrects the corners of the pro-
jected image individually.
s p.32
H-Keystone -60 to 60
Quick Corner -
Blanking
Covers part of the image with a blank (black
screen). You can set the top, bottom, left, or right
of the image.
Audio
Volume Adjusts the volume.
Inverse Audio
*
On, Off Sets whether or not to invert the left and right
audio output channels. Set to On when the pro-
jector is suspended from a ceiling and is using
the internal speakers.
To Next Page
Loading...
