Introduction
12
Rear
Name Function
a
Security slot ( )
The security slot compatible with the MicroSaver security system manufac-
tured by Kensington. For more details, visit the homepage of Kensington at
http://www.kensington.com/.
b
Power inlet
Connect the power cord. s p.24
c
Remote receiver
Receives signals from the remote control. s p.23
d
Opt.HDMI port
Connects the power supply port for the optical HDMI cable.
e
HDMI1 port
Connects HDMI compatible video equipment and computers.s p.19
The HDMI1 port supports HDCP 2.2.
f
HDMI2 port
g
USB port
Connects the optional Wireless LAN unit. It is also used when updating the
firmware.
s p.20
h
Service port
Service port. This is not normally used.
i
LAN port
Connects a LAN cable to connect to a network. s p.20
j
PC port
Connects to the RGB output port on a computer. s p.19
k
RS-232C port
When controlling the projector, connect the projector to a computer with an
RS-232C cable. This port is for control use and should not normally be used.
l
Trigger Out port
Connects with external devices such as motorized screens. s p.20
To Next Page
Loading...
