Configuration Menu
60
Function Menu/Settings Explanation
Advanced
Gamma 2, 1, 0, -1, -2, Custom-
ized
*3
, Reset
Performs gamma adjustments. You can
select a raw value or adjust using a custom
value.
s p.38
RGBCMY R/G/B/C/M/Y Hue, Satura-
tion, Bright-
ness
Adjusts the hue, saturation, and bright-
ness for each R, G, B, C, M, and Y color.
s p.36
Deinterlacing Off, Video, Film/Auto
(This can only be set when Image Pro-
cessing is set to Fine or when receiving
480i, 576i, or 1080i signal input from the
HDMI1, or HDMI2 ports.)
Converts the signal from interlaced (i) to
progressive (p) using a method appropri-
ate for the image signal.
•
Off: This is ideal for dynamic motion im-
ages.
•
Video: This is ideal for viewing general
video images.
•
Film/Auto: Performs the optimal conver-
sion for film, CG, or animation input sig-
nals.
EPSON Super White
*1
On, Off
Set this to On if you are experiencing
bright over exposure of whites in your im-
age. When set to On, HDMI Video Range
settings are disabled.
Power Con-
sumption
High, Medium, Low You can set the lamp brightness to one of
three settings.
Select Low if the images being projected
are too bright. When Low is selected, pow-
er consumption during projection decrea-
ses, and fan rotation noise is reduced.
Auto Iris
Off, Normal, High Speed You can change the luminance adjust-
ment tracking for changes in brightness in
the displayed image.
s p.35
Reset
Yes, No
Resets the adjustment values of Image set
in the current Color Mode to the default
settings.
*1
Only when an HDMI1 or HDMI2 image signal is being input.
*2
Only when an HDMI1, HDMI2, or PC image signal is being input.
*3
Settings are saved for each type of input source or Color Mode.
Signal menu
The Signal menu cannot be set when a LAN image signal is being input.
To Next Page
Loading...
