Using the Configuration Menu Functions
28
5
Select a setting value.
Press the [ ] and [ ] buttons to change the
setting value.
For commands which have ON/OFF settings, use
the [ ] and [ ] buttons to select the desired
setting, and then press the [Enter] button.
6
Select other menu items in the same
way.
Repeat steps 2 to 5 to change the setting for other
menu items. To return to a previous menu, press
the [ESC] button.
7
Close the menu.
Press the [Menu] button.
•
••
•
Sub-menu items which cause another sub-menu to be displayed when they are selected have
after them. If you select such menu items and press the [Enter] button, you can then change
the settings in the next sub-menu which appears.
•
••
•
Refer to list of functions for details on the functions of each menu item. (p.20)
Adjust
+
-
+
-
+
-
+
-
+
-
: Select : Enter
4
:
3 16
:
9
Video
Audio
Setting
Advanced
About
Reset All
Video Signal
Color Mode
Position
Brightness
Contrast
Color
Tint
Sharpness
Aspect Ratio
Reset
:
:
:
:
:
:
:
0
0
0
3
0
Select
Select
Execute
[Theatre ]
[Auto ]
:
ON OFF
EPSON Cinema Filter
Menu
A/V Mute
E-Zoom
Freeze
Enter
Remote control
"Video" Menu "Setting" Menu "About" Menu Using the Configuration Menus
"Audio" Menu "Advanced" Menu "Reset All" Menu
To Next Page
Loading...
