57
Appendices
Rear
Base
•
••
• Remote control light-receiving area
(
Setup Guide
)
Receives signals from the remote control.
•
••
• Power inlet (p.6)
Connects the power cable.
•
••
• Security lock ( ) (p.59)
•
••
•
Air filter (air intake vent) (p.44, 49)
Prevents dust and other foreign particles from
being drawn into the projector. When replacing
the lamp, replace the air filter also.
•
••
•
Lamp cover (p.46)
Open this cover when replacing
the lamp inside the projector.
•
••
•
Fixing screw holes
These holes are for the fixing screws that are
used to secure the projector.
Front/Top Left Side Base
Control Panel Rear Remote Control
To Next Page
Loading...
