16
Connecting to a Computer
Projecting Images from the Computer
The shape and specifications of the computer's monitor port will determine
what type of cable should be used. Check the following to see which type
of port your computer has.
Use the accessory computer cable to connect the Computer/Component
Video port at the rear of the projector to the monitor port of the computer.
Use the optional VGA- HD15/BNC PC Cable to connect the Computer/
Component Video port at the rear of the projector to the monitor port of the
computer. See "Appendices: Optional Accessories"
p.84
If the Monitor Port is a Mini D-Sub 15-pin Port
Computer cable
(accessory)
To monitor port
To Computer/
Component
Video port (blue)
TIP
• After projection starts, change the "Input Signal" setting in the
"Video" menu to "Computer".
p.46
• If more than one external component is connected to the projector,
use the [Source] button on the projector's control panel or the
[Computer] button on the remote control to select the Computer port
as the input source.
p.28
• Do not bind the power cable and the computer cable together,
otherwise image interference or errors in operation may result.
If the Monitor Port is a 5BNC Port
To Computer/
Component Video
port (blue)
To monitor port
VGA- HD15/BNC PC Cable
(optional)
TIP
• After projection starts, change the "Input Signal" setting in the
"Video" menu to "Computer".
p.46
• If more than one external component is connected to the projector,
use the [Source] button on the projector's control panel or the
[Computer] button on the remote control to select the Computer port
as the input source.
p.28
• Do not bind the power cable and the computer cable together,
otherwise image interference or errors in operation may result.
To Next Page
Loading...
