Epson EMP-53 - Wide-Screen Projection of Images from Video Equipment (Changing the Aspect Ratio)

42
Functions for Enhancing ProjectionFunctions for Enhancing Projection
Wide-screen Projection of Images from Video
Equipment (Changing the Aspect Ratio)
This function changes the aspect ratio of images from 4:3 to 16:9 when
component video images (YCbCr and YPbPr) or video images (S-Video or
composite video) are being projected. Images which have been recorded in
digital video or onto DVDs can be viewed in 16:9 wide-screen format.
PROCEDURE
Press the [Menu] button on the remote control, and
then select "Aspect Ratio" from the "Video" menu.
For details on this operation, refer to "Using the Configuration
Menus".
p.57
Press the [ ] and [ ] buttons to set the aspect ratio to
either "4:3" or "16:9", and then press the [Enter]
button.
After making the adjustment, press the [Menu] button
to exit the configuration menu.
When images in squeeze
mode are projected at 16:9
When images in squeeze
mode are projected at 4:3
1
Video Signal
Color Mode
Select [Theatre ]
Video
Audio
Setting
User's Logo
Advanced
About
Position
Adjust
Brightness
Contrast
0
0
Color 0
0
Tint
Sharpness 0
0
Aspect Ratio
Reset
Execute
Reset All
+
-
+
-
0
0
+
-
Select [Auto ]
4 : 3 16 : 9
+
-
+
-
:
:
:
:
:
:
/
[ESC]: Return [ ]: Select [ ]: Set [Menu]: Exit
2
Video Signal
Color Mode
Select [Theatre ]
Video
Audio
Setting
User's Logo
Advanced
About
Position
Adjust
Brightness
Contrast
0
0
Color 0
0
Tint
Sharpness 0
0
Aspect Ratio
Reset
Execute
Reset All
+
-
+
-
0
0
+
-
Select [Auto ]
4 : 3 16 : 9
+
-
+
-
:
:
:
:
:
:
/
[ESC]: Return [ ]: Select [ ]: Set [Menu]: Exit
3