Epson EMP-732 - Projecting S-Video Images; Projecting Component Video Images

25
Connecting to a Video Source
User’s Guide
Projecting S-Video Images
Use a commercially-available S-Videog cable to make the connections.
Projecting Component Video Images
Use the optional component videog cable to make the connection.
"Appendices: Optional Accessories and Consumables" sp.108
S-Video cable
(commercially-available)
To [S-Video] port
To S-Video output port
TIP
If more than one input source is connected to the projector at the
same time, you can use button operations to select the signals to be
projected.
s
p.37
Component video cable
(optional)
To component
video output port
To [Computer/Component Video]
port (blue)
Use to connect the
projector to a commercially
available component video
cable (RCA × 3, male).
TIP
•The input source is determined automatically based on the input
signals.
Some video signals may be reproduced with different colours from
the original images. In such case, set the input source to
"Component Video".
s
p.61
•If more than one input source is connected to the projector at the
same time, you can use button operations to select the signals to be
projected.
s
p.37